ECUHELP KT200 II Full Version

ECUHELP KT200 II Full version with offline dongle & KT200 Plus [Add more ECUs, Online Update] 

 

ECUHELP KT200II Full Version with Offline Workstation Enabled Software: 
Car OBD, Truck OBD, Tractor OBD, Boat OBD, Motorbike OBD.Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gear

Why KT200II is Preferred? Let’s read some Customer Feedback:

1. KT200II works perfectly with less dropout and more of a chance of not losing the server.

2. KT200II has one offline dongle. KT200II/KT200 works offline, 90% of the work was done Offline. And it worked without any flaws. Great tool.

3. The software is not only locked to 3 or 4 computers. You will own the hardware and use it wherever you want.

4. It does VR reads (Download ECUHELP 3.03 for VR files).

5. The software is running stable, and the cable is built of good quality.

 

ECUHELP KT200 Plus ECU Programmer, add More Read/Write/Clone Protocols for KT200 and KT200ll ,
Support OBD and Bench model.And Boot mode will be update in the near future.Also Denso will be update soon.

Built-in DTC off and map modification function.

 

Notice: After receiving the device, please put the kt200II main unit and kt200 plus together, take photos of the front and back, and provide the kt200 plus ID (install kt200 plus software,then you can get kt200 plus ID as the below picture) to us for activation.

 

 

KT200II offline software is in the gray dongle.just plug the gray dongle to the pc when you need to install offline software.

Top reasons to own both KT200 II Offline Workstation and KT200 Plus:
1. Read / Write more ECU & TCU protocols
-ECU Series: Bosch EDC16/ME9 – Series, Delphi DCM6xx – Series, Delphi
DCM7xx- Series, Delco Exx – Series, Bosch MG1US / UA008 – Series, Bosch
MGD1Cxx / MG1Uxx – Series, Siemens / Continental Mxx – Series, Siemens /
Continental Sxx – Series,  Delphi CRD2.XX-Series,
Delphi CRD3.XX-Series, Delphi MT-Series, Siemens / Continental SIMOS-Series, Bosch MEDC17 – Series.
-TCU Series: HITACHI SH72xxx – Series, Infineon – Series, Delco 6xx-Series

***And more ECU/TCU protocols will be upgraded online.

2. Support ECU service (File modification, DTC off, IMMO off, TPROT etc)

3. KT200 Plus can work alone.

KT200 Plus = KTflash dongle + J2534 Hardware + all the license activated free for one year.

4. KT200 Plus supports online update for free one year, after one year, the subscription service fee is 119eur. 

5. KT200 Plus supports Checksum Calculation.

Please review this comparison table of KT200 Plus and KT200II： 

Feature	KT200 Plus	KT200II
Read/write ECU	Can read and write ECU alone.	Read / Write most of ECU in the market.
Supported Mode	Support OBD Mode and Bench mode, not yet support Boot mode, please wait for the update.	R/W ECU Bench/OBD/BOOT/BDM/Jtag Mode
ECU Service	File modification, DTC off, IMMO off, TPROT, etc.	Need the third part software to edit the ECU data.

What is KT200 Plus? 
The KT200 Plus is a plug-in module ECU programmer designed to address the shortcomings of previous equipment and provide continuous function updates for future devices. It operates independently and supports online updates.

KT200 Plus ECU Support List:
KT200 Plus support DCM6.2AP series, DCM7.1AP Serial, EXX series, MG1US、UA008 Series, MXX Series，SXX Series, HITACHI 71XX, INFINEON Series, MEDC17 Series, Clone MEDC17 Series, Clone SIMOS Series, CRD2XX Series, CRD3XX Series, 6XX Series，MTXX Series, edc xx and me9 xx Series and and more protocols will be updated soon.