HEX-V2 VAG COM

HEX-V2 VAG COM VCDS Unlimited-Vins!

HEX-V2 VAG COM (OEM 1:1) – Professional diagnostic and programming device for all VAG group (Audi/Volkswagen/Skoda/Seat) vehicles from 1996 till today! Our HEX-V2 device comes with Unlimited VIN codes, that means you can diagnose and scan as many vehicles as you want! Professional version also gives FREE updates, no need any special loaders to run software. HEX-V2 supports CAN-bus self-diagnosis in newer VAG vehicles and allows to perform functions like: access to all installed control units, all error codes in plain text, reading and deleting, the error memory, perform encoding, measured values read and modify, service reset, long-life, adjust channels, teach immobilizer, operation adjust automatic tailgate, electronic parking brake reset, DSG gearbox oil change, DPF forced regeneration, Service Reset and much more.

Functions & Features:

Fully compatible with almost of VW, Audi, Seat and Skoda models through the current
model year, including models using a direct CAN connection for diagnostics.
Can use the new 7-Digit PIN/SKC codes to match new keys in almost immobilizer
equipped VW/Audi/Seat/Skod models.
Can access almost control modules which require proprietary VAG modes running
the KWP-2000 protocols (2001+ Teves Mk.60 ABS, numerous 2002+ modules), KWP6000
(CAN) and/or KWP7000 (UDS).
Completely revised and expanded ROD (ODX) Data. Including coverage for almost
the latest models of cars such as the new 4G-chassis Audi A6. The structure of
our ROD data has also been revised to eliminate much redundancy and keep the
installer size reasonable.
Support for new UDS addresses required for compatibility with new systems
found in latest car models.Auto-Scans now show sub-system label file names.
EDC15-16 Mileage reading now includes support for some EDC15 V6 TDI ECUs.
Revised and expanded Label Files More than 350 new or revised files since the
last data-set.

Systems required: (32bit/64bit) of Windows 7, Windows 8, , Windows 10 . Not supported Windows 2000,Windows XP,Windows on VM Systems (Parallels, Virtual Box, etc) ,MAC
Features of HEX-V2 Vag-Com VCDS Unlimited-Vins:

USB connection for compatibility with all modern laptops.
Compatible with all diagnostic-capable VW/Audi passenger cars from 1996 to current; K, K+L, dual-K, or CAN.

Detachable USB cable. The supplied cable has a proprietary screw locking mechanism, but it can be replaced temporarily with a standard USB-A to USB-B (“printer”) cable should it become damaged.
Modern 32-bit micro-controller and fully updateable firmware.

Tri-Color (red/green/blue) status/activity LEDs with greatly improved visibility from almost any angle.
12 month guarantee against defects in workmanship or materials.

Includes an embedded license for VCDS and thus acts as a “dongle” for the software, allowing the software to be used and installed on any compatible PC.
Compatibility:
This interface works with all diagnostic-capable VW-Audi Group passenger cars from 1996-2021 through current years, except it does NOT fully support the following vehicles:
Routan vans — All years. These are re-badged Chryslers and don’t use VW’s diagnostic protocols. and Lambohini
Computer Requirements:

We recommend at least a 1 GHz dual-core processor with 1 GB of RAM and Windows 7 or newer. Windows 8, 8.1, or 10 on a machine robust enough to support the respective operating system are also fine.

Extending this Interface:

The USB standards do not allow for passive extension cords!

Software:

The HEX-V2 should be used with the latest version of our VCDS software. The HEX-V2 does not have the ability to emulate a dumb serial pass-through interface and thus unlikely to be compatible with any software other than VCDS.

This Hex cable is multi-language, and can be continuously upgraded from official website through the software’s own loader (Software loader are included in CD disk or can be added in private message [ DOWNLOAD LINK ]). When you want install software pleas make sure you have disabled your antivirus software, because antivirus software can delete files from loader, but thats not problem we can resend software to you.

Driver Installation:

The HEX-V2 enumerates as an HID device and does not require a special driver. However, there are some HID power management quirks in 8.1 and newer fixed by installing a device-specific “driver” (actually just an INF file) supplied with the VCDS installer.